HUITIAN

9060S black silicone for cure and durable adhesion to a variety of substrates without primer.

FEATURES
9060S (former model No. was 906S) is a black, slightly slump silicone adhesive / sealant designed for applications where non-corrosive cure and durable adhesion to a variety of substrates without primer.
One component adhesive/sealant
Cures at room temperature when exposed to moisture in the air
Oxime cure system
Slightly slump.
Good adhesion
Excellent dielectric properties
Stable and flexible form -60℃ to +250℃

HANDING PRECAUTIONS
Product safety information required for safe use is not included. Before handing, read product and safety data sheets and container labels for safe use, physical and health hazard information
STORAGE
When stored at 8- 28℃ in the original unopened containers, this product has a usable life of 9 months from the date of
production.
Special precautions must be taken to prevent moisture from contacting this material.Containers should be kept tightly
close.
APPLICATIONS

Sealing and bonding applications where non-corrosive cure is required.
Applicable to adhesive/seal of general industrial assembly.

TYPICAL PROPERTIES
Property Standard Unit Typical value
Color / / Black
Appearance / / Slightly slump
Density(25℃) GB/T 13354-1992 g/ml 1.25
Skinovertime
(25℃,60%R.H)
GB/T13477.5-2002 min 20
Thephysicalpropertiesbelow,curedafter7daysat25℃and 60%R.H.
Hardness GB/T 2411-2008 Shore A 30
Elongation GB/T 528-2009 % 300
Tensile strength GB/T 528-2009 MPa 1.30
Shear bond strength
(Al-Al)
GB/T 13936-1992 MPa 1.20
Temperature range / ℃ -60℃-+250℃
Volumeresistivity GB/T1692-2008 Ω·cm 1×1014
Dielectricstrength GB/T1695-2005 kV/mm 18

high performance Black PU sealant sausage, HT8924 for cars and truck use

Description:

8924 high performance polyurethane sealant is a single component, W High thixotropy, does not flow, low odor polyurethane adhesive. Product is low viscosity, good thixotropy, which is convenient for manual gluing. Cured adhesive is elastomers, anti cold and hot change, good resistance to stress change performance. Can be painted, polished, no corrosion, elevation and top construction does not flow. There is extensive adhesion to various substrates.

Typical use

Seal bus air conditioning, weld, luggage and other parts. Deal ships, locomotives, construction, paint and other industries and other usage of low bond strength.

Characteristic before curing

Color:                                     White/black/grey/iron grey

Density g/cc:                                      1.30g/cc

Tack Free Time(min)                                 50

(23℃/50%RH)

Characteristic after curing

Tensile strength MPa:                              1.8 

Elongation at break (%):                           500

Tear strength KN/m:                                   8

(GB/T 529)

Harness: ShA:                                             40

(GB/T 531-1999) 

Work Temperature℃:                            -40～90

Instructions for use

Surface cleaning: clean surface: remove the rust, dirt, water and oil etc...

Gluing: cut a small hole in the beak suitable rubber barrel, glue mouth diameter should be considered sizing width and decide, into the glue gun start sizing operation.

Curing: a large temperature and humidity environment on polyurethane adhesive surface drying and curing effect, low temperature, curing slow; temperature and humidity is too high, dry too fast. The best operating environmental conditions: temperature 20 to 30 DEG C for 50 ~ 70%RH, humidity exceeds 5 to 35 DEG C; the temperature, humidity 35 ~ 75%RH range please careful construction.

Polyurethane adhesive in gluing and curing process, avoid contact with chemicals containing hydroxyl, amino and, this kind of material will cause the polyurethane glue curing incomplete.

Storage: unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed, a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove after normal use, does not affect the product performance.

Package

310ml/Cartridge, 24Cartridges/Carton

600ml/Sausage, 20Sausages/Carton

Storage

Store in cool and dry place 5-25 C (humidity less than 70% RH)

Storage period: Cartridge pack for 9 months

Sausage pack for 6 months

MS Sealant 7930 used for trucks and buses for joint sealing, black modified silicone

Description:

7930(HT9301MS) MS sealant is a silicon alkyl terminated polyether as a main component, low viscosity, general type of one component moisture curable sealant. Curing material combines the advantages of polyurethane and silicone adhesive sealant products, is a new generation.

Typical use:

Preliminary fixed the sealing of joints, such as weld seam sealing, etc.

Characteristics before curing:

Color:                                                            White / Black / grey paste

Base material:                                               Modified silicone

Density:                                                         1.38

Tack free time (min):                                      20

(23℃/50%RH)

Pressure flow viscosity(s/10g):                       6 5-15

(0.5MPa, 23℃,3mm)

Characteristics after curing:

Instructions for use:

Curing:The parts are arranged in the air sizing, when after the formation of epidermis, from the surface to the interior of a room temperature curing, and 55% relative humidity at 24 hours, the curing depth of 2 ~ 4mm. With the extension of time, the curing depth increases gradually. The 7 day curing depth 6mm.

Storage: Unused plastic blocks should be tightened immediately, to seal the tube mouth save. Again, if sealed, a little crust, remove immediately after, does not affect the normal use. In the process of storage, the nozzle may also appear a few crusts, remove after normal use, does not affect the product performance.

Cautions:

Keep away from children.

If you accidentally come in contact with the skin, wipe in the curing a cloth before class, and using alcohol solvent scrubbing.

If the case of contact with eyes, rinse immediately with water, and medical treatment.

Recommended for use in a well ventilated place

Product safety data please refer to the product MSDS.

Package:

White: 310ml/Cartridge

White: 600ml/ Sausage

Black: 310ml/Cartridge

Black: 600ml/ Sausage

Grey: 310ml/Cartridge

Grey: 600ml/ Sausage